The Colnago C64 frame is fully hand made in Italy and is the result of more than 2 years of research, It represents the continuity of the history of a company that has collected successes and innovations for more than 60 years.
COMPLETELY REDESIGNED, IT IS MORE STIFF AND RESISTANT AND WEIGHS 40 GRAMS LESS.
The Colnago C64’s fork has been fully redesigned, with an external rib-shape to give the rider more comfort (front stiffness) but also to increase the ride-quality (side stiffness). To increase the stiffness and strength, we’ve created an internal rib in the steerer tube, which also holds the nut for the top cap and eliminates the need for an expander-plug. With the same shape as the disc fork, the rim version houses the pivots for the direct-mount brakes – which offers plenty of tire clearance. The fork length was increased by 5mm to be able to accommodate larger tires yet still have a hollow upper structure, to lower the weight but still retain the same stiffness and performance as the C60 fork. Dropouts are now full carbon – replacing the alloy dropouts used on the C60.
LIGHTER AND STIFFER THANKS TO THE REDUCED THICKNESS, THE UNIDIRECTIONAL FIBER AND THE SPECIAL INNER RIB.
The Colnago C64’s headtube features a new technology that allowed us to reduce the thickness and lower the weight. The shape was also revised to increase side stiffness. As was the entire frame, the headtube was changed from an outer 3k carbon finish to a lighter UD finish.
We revised the upper cups, which are now made of a special polymer composed of carbon fiber and a special mix of nylon and elastomers. This feature offers the additional capacity to absorb road vibration, improving both handling and rider comfort.
THE STELLAR SECTION AND THE REDUCED WIDTH INCREASE THE TORSIONAL RIGIDITY.
Starting with the design of the heavily shaped C60 down tube, we revised the bottom portion, which is now a bit narrower to match better with the rear triangle – for a perfect balance. To increase the torsional stiffness and maximize the integration of components, the down tube features a recessed bottle cage area which creates two long ribs around the middle of the downtube. Regardless of the fact that the C64 was not designed to be a purely aerodynamic frame, the recessed bottle cage gives a clear aero advantage over a traditional mounting position. Cable stops for mechanical shifting are now located on the down tube, in a tucked position behind the head tube.
SINGLE PIECE MONOCOQUE, TO MAKE THE FRAME MORE STIFF WITHOUT INCREASING WEIGHT.
Probably the most striking difference between the C60 and the C64 is that the seat tube meets the seat tube lug to form a single piece. This technical feature increased the stiffness of the frame while keeping the weight low. The monostay is no longer straight either, but is conified to create the best possible gluing surface. Of course, this means we now have 14 different seat tubes for all 14 sizes!
A MORE ELEGANT LINE, WITH THE SEAT POST LOCKING SYSTEM COMPLETELY HIDDEN.
For a perfectly streamlined seat post area, the Colnago C64 now features a hidden integrated clamp. Instead of a top-loaded, two-piece seat post clamp, the C64 has a co-molded alloy bed, with a single removable part tightened from the bottom. The overall look is sleek, and the weight reduction is around 15g compared to the other style. The bottom-pull concept also provides further locking strength as rider weights increase.
Based on the shape of the V1-r seatpost, the semi truncated drop shape adds a bit of aero performance, while giving better vertical compliance compared to the previous round 31.6mm seatpost. The default post has 15mm setback, while optional 0mm and 30mm will be available aftermarket.
CABLE GUIDE PRINTED DIRECTLY IN CARBON.
Designed around our proven ThreadFit82.5, which is basically a PressFit with removable base sleeves, the bottom bracket lug is now more complex than ever. The cable guide, which was typically a bolt-on plastic part, is now molded into the lug – to save grams as well as to offer the biggest possible radius for the best shifting performance. Another small detail is the hex shape on the side of the down tube insert, which is our datum point to check anything during the bonding of the frame and, later, the QC process. Another striking difference is the asymmetric insertion of the chainstays, with the left one being much wider.
A BOTTOM BRACKET DESIGNED SPECIFICALLY FOR OUR FRAMES.
From the beginning of the ThreadFit 82.5 project, the idea was ingenious: keep the reliability of a threaded BB but offer the benefit of a wider shell, typical of a PressFit system.
Now, we’ve moved further forward with a collaboration with premium bearing brand Ceramic Speed. In conjunction, we’ve created our own threaded, wider bottom bracket, with best-in-class bearings. We will be offering 3 different bottom brackets (Campagnolo, Shimano, SRAM) as aftermarket purchase options.
FULL CARBON DROPOUTS AND HORIZONTAL CHAIN STAYS MOLDED IN ONE PIECE.
Another key area where we completely changed our technology is the chainstay/dropout area. The C64’s dropouts are now fully part of the chainstays. Rim-brake chainstays are a bit wider than the disc version, to help keep the same rear stiffness due to the lack of the thru-axle. This results in a very light but stiff full carbon rear end. The replaceable derailleur hanger is the very same, internally mounted hanger used on all our current road rim-brake frames. The lightweight seat stay is designed around very wide tires, and houses the alloy threaded inserts for direct-mount brakes.
UP TO 700X28C TIRES.
While lower weight has so far been the key point of the new frame, tire clearance is another important factor we had to address while designing the new C64 Disc. The frame has clearance for 28mm tires with plenty of room to spare. Brakes are the limiting factor here, so the disc version has a bit more space, which can allow you to have a 30c tire installed.
|TERMS & CONDITIONS|
|Prices displayed will have VAT tax added where applicable. Customers located outside of the European Union are not subject to VAT.|
|Some complete bicycles may have variable delivery times. The exclusivity of these products means that their construction or finishing is done according to customer requirements and specifications following an order confirmation. In order to complete an order you do not have to pay the full cost, but it is sufficient to pay a deposit, usually equivalent to 30% of the full price. The 70% balance will be due only when the item is ready to be shipped.|
|Please note delivery times displayed automatically by the system may differ and we advise contacting us by email or phone in order to find out accurate information on availability.|
|Ciclicorsa.com is the official retailer of all brands on this website. Ciclicorsa.com maintains a privileged and direct relationship with the distributed brands without any third party involvement. This provides first-class service for our customers and extends to a complete after-sales service including warranty. Please contact us for any questions regarding the purchase of this product.|
|Estimated Delivery Times by Courier|
|Courier||DHL||GLS||FEDEX/TNT||Poste Italiane - EMS|
|EUROPE||1-3 DAYS||1 - 2 DAYS (Italy)||3 - 5 DAYS||2-5 DAYS|
|WORLDWIDE||3-5 DAYS||-||5 - 10 DAYS||5-7 DAYS|
|Shipping times do not include possible delays due to customs. We offer several shipping services available, with different rates and delivery times. During check-out you may select your preferred method of shipment. Every shipment is fully covered by insurance (free of charge) against lost or damaged items. A tracking number will be provided with each shipment.|
Ciclicorsa.com guarantees the best prices on the web, but in case you've found this item at a better price elsewhere, just fill in the form below and we'll do our best to match the price.