Its high profile can transfer all the aerodynamic advantages acquired from our research and development study to the road.
The design of each wheel component enables maximum aerodynamic penetration, so that the wind stops being a hindrance to the cyclist and, at certain angles, becomes a help. The wheel features unidirectional carbon rims with a rounded-profile optimised in the wind tunnel, new aerodynamic aluminium hubs and the ceramic USB cup-and-cone bearing system.
Every design decision is determined by the sole goal of optimising performance. The profile of the rim, which has an internal width of 19 mm, makes a perfect pairing with 23, 25 and 28 mm tyres.
Thanks to 2-Way Fit technology, Campagnolo guarantees complete compatibility with both clincher and tubeless tyres. The hole-free upper bridge, achieved through the patented MoMag system, allows a weight saving, increased stiffness and now also an aid when using tubeless tyres: no tape is required.
Maintaining and cleaning the wheel during tyre replacement has never been easier. These wheels were made for extreme performance, the Campagnolo mantra is reliability: the G3 spoke pattern with double spokes on the left of the front wheel ensures balanced and safe braking in all conditions.
BORA WTO 60 DB: made for winning in sprint finishes, circuit races, time trials and triathlons. Available versions: dark label, Campagnolo FW hub, HG or XDR.
The design of the rim enables maximum aerodynamic penetration: at wind angles between 10° and 20°, a situation that accounts for 80% of time on the saddle, this wheel is unequalled when it comes to overcoming drag.
The streamlined design of the central part of the hub and the special design of the flanges decrease the frontal area of the component reducing airflow turbulence.
The 24-spoke pattern, along with their elliptical cross section, results in a far superior drag reduction.
The well-known USB cup-and-cone bearing system guarantees 50% greater smoothness than standard bearings.
The 2-Way Fit profile allows you to fit either a clincher tyre or to opt for a tubeless tyre and benefit from the lowest rolling resistance.
The 19 mm inner width enables you to fit 23, 25 and 28 mm tyres, with perfect pairing of the rim-tyre system.
The 60 mm profile allows the transfer of all the benefits of aerodynamic optimisation that can’t be achieved with lower profiles.
The wheel structure enables minimal energy dissipation, transferring all the energy produced by the cyclist to the asphalt.
A 60 mm profile with a wheelset weight of 1,590 g makes it the perfect ally to win sprint finishes, circuit races, time trials and cycling sections in triathlons.
Aerodynamic carbon rims, aluminium hubs and a ceramic USB cup-and-cone bearing system: every design decision for these wheels was made to optimise performance. The inner rim width of 19 mm makes it possible to fit 23mm, 25mm and 28mm tyres. Furthermore with the 2-Way Fit version, Campagnolo re-proposes the consolidated technology that permits perfect compatibility with clincher tyres and tubeless.
If the purpose of these wheels is extreme performance, safety is ensured by the G3 spoke layout with twice the spokes to the left in the front that guarantee balanced and safe braking in any condition.
24 steel spokes in the front elliptical aero cross section, spaced in groups of three through the G3 system
24 steel spokes in the rear elliptical aero cross section, spaced in groups of three through the G3 system
Black aluminium monolithic hub
USB cup-and-cone bearing system
Hub edge: 100 mm in the front, 142 mm in the rear
Axle type: 12mm aluminium thru axle
Cup-and-cone bearing system
Profile height: 60 mm
Rim material: carbon
Rim cross section (H x W): 60/26.1mm
Internal diameter of rim: 19 mm
Water Transfer graphic
The Bora™ WTO 60 Disc Brake wheel is entirely hand-assembled by a specialised Campagnolo® technician and is 100% checked by electronic instrumentation. This procedure ensures that every single Campagnolo® wheel offers maximum performance and reliability
44 mm tubeless valve
40 mm valve extender
Bushing to reduce the size of the valve hole
2 levers in composite material for tyre removal
|TERMS AND CONDITIONS
|Payments are only accepted in EUR € currency.
|It is possible to pre-order all items in our catalog that are currently out-of-stock. Delivery times automatically displayed on out-of-stock items by our online shop may differ slightly based on the articles selected and the information provided to Ciclicorsa.com at that time by suppliers.
|Ciclicorsa.com offers a free return policy within 15 days of receiving the item. All products must be returned in the original packaging and with original labels. Items cannot be worn or used before returning. Any items that are returned without original packaging or labels, or is not in original condition will not be accepted.
|Shipping on exchanged items is free of charge.
|Every product sold by Ciclicorsa.com is covered by the manufacturer's warranty.
|Estimated Delivery Times by Courier
|Poste Italiane - EMS
|1 - 2 DAYS (Italy)
|3 - 5 DAYS
|5 - 10 DAYS
|Shipping times do not include possible delays due to customs. We offer several shipping services available, with different rates and delivery times. During check-out you may select your preferred method of shipment. Every shipment is fully covered by insurance (free of charge) against lost or damaged items. A tracking number will be provided with each shipment.
Ciclicorsa.com guarantees the best prices on the web, but in case you've found this item at a better price elsewhere, just fill in the form below and we'll do our best to match the price.