Pinarello | Cicli Corsa

Darimo Seatpost for Pinarello Dogma F

Looking for a not round seatpost for your Pinarello Dogma F ?

Here you have the solution. Now you can change your original not round seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically.

The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask.

The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance.

Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing.

The totally new designed clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7*9mm.

Choose your seatpost length:

To choose the proper seatpost length, measure the length of your seatpost out of the frame. Measure from seatclamp (top of vertical tube) to saddle rails centre. Then choose the appropriate size in the following table.

If there are two possibilities it is recommended to take into account the variation and use of the bicycle by different riders. If you need a larger or smaller size, please contact us to prepare a seatpost as up to 500 mm or even longer.